Red Color Mini Magnetic Wall Metal Detector Multi - Functional For Copper Pipe

Multi-functional wall detector model

Multi-function wall detecotor can detect the following items inwater wall:

- Magnetic metal,

- Non-metal,for example beam,plastic pipe full of water,

- Non-magnetic metal,for example copper pipe, Charged objects ,for example electric wire.

Press on button,ring 1 and the indication 5 ( above)light up green,and multi-functional wall detector model to be activated.

The detectors will be preferred to detect metal objects,nail sand screws in the base material may cause a wooden beam to be indicated as a metal object on the display.When display4 indicates a continuously high amplitude of measuring indicator i and fine scale j,restart the measuring procedure again by positioning the measuring tool at different location on the base material.

In rare cases ,the measuring tool is not able to detect the base material may because the side with the sensor area 13and the type plate 14 is solid or dirty.Just clean the measuring tool with a dry,soft cloth and restart the measuring procedure.

Metal model

Through the Metal model can detect the magnetic metal and non-magnetic metal.Press on button ring 1 and indication 5lights up green(Above the button ),Metal model activation.On display ,Indicate the detected magnetic metal(e,g. iron)On display ,Indicate the detected magnetic non-magnetic metal.Note:For reinforcement steel mesh and steel in the examined base material,scale figure "i" will show all scale. To distinguish the type of metal,detectors must be found at thetop of the metal objects(ring 1 is lit red).

Note:For reinforcement steel mesh and steel in the examinedbase material,an amplitude is indicated i.For reinforcementsteel mesh,it is typical that the symbol for magnetic metal is indicated on the display directly above the iron rods,whereas between the iron rods,the symbol d for non-magneticmetal will appear.

Some unfavorable factors during the detection will affect thedetect accuracy,such as the follwing:

- Environmental factor
Including e.g., the proximity of other equipment that producestrong magnetic or electronmagnetic fields,moisture ,metallicbuilding materials,foil-laminated insulation materials orconductive wallpaper or tiles.

- Material and size of the objects.
- Material and condition of the base material.

- Operation mode selection is not accurate.
Therefore,please also observe other information sources(e.g.construction plans) before drilling,sawing or routing into walls,ceilings or floors.

* Less scanning depth for wires while the conductors are not "live" .

Warning function

When lights up on the display and indication 5(above button ) flashes,the measurement must be restarted.Remove the toolfrom the wall and place it on the base material at a differentlocation.

Care

Keep the measuring tool clean and dry at all times to ensureproper and safe working.
- Do not immerse the tool in water or other fluids.
- Wipe away debris or contamination with a dry,soft cloth.Do notuse cleaning agents or solvents.
- ln order not to affect the measuring function,decalsstickers orname plates,especiall metal ones,may not be attached in thesensor area 13 on the front or back side of the measuring tool.

- Do not remove the contact pads 12 on the back.
- Do not open the instrument by yourself. Store and transport themeasuring tool only in the supplied soft package.
In case of repairs,send in the tool packed in its soft package.

Warranty

Check the measuring tool each time before use. ln case of visible damage or loose components inside themeasuring tool, safe function can no longer be ensured. When flashes on the display,send the tool in the providedsoft package to the dealer or our company.

The instrument comes with a one-year warranty. This warrantyeffective premise is:according to the company's operatinginstructions for correct operation,processing,ceanin andmaintenance of the tool,and the tool is maintained good technical condition.This means that in the tool can be used inthe company's original components and spare parts. This warranty is provided in the tool during the whole life expectancyof the defective parts of the repaired or replaced free of charge.If the component due to normal wear and in need of repair ofreplacement,is not in the warranty range. All illustrations ,descriptions and technical specificationsmay be subject to change without prior notice.