Shenzhen Jinside Technology Co., Ltd
Shenzhen Jinside Technology Co., Ltd
Add to Cart
620-690nm < 1mW Digital Laser Distance Meter , Small Laser Distance Measuring Device
Target surfaces
Measuring errors can occur when measuring towardcolorless liquids (e.g. water) or dust free glass, Styrofoam or similar semipermeable surfaces. Aiming at high gloss surfaces may deflect the laser beam and lead to.measurement errors.Against non-reflective and dark surfaces the measuring time may increase.
- If the equipment is used in a manner not specified by the manufacture,the protection provided by the equipment may be impaired.
- This equipment contains no operator serviceable parts, serviced by thequalified person only.
- Must be consulted this manual in all caseswhere symbol,is marked.
Technical data
| Model | S20/S30 /S45 m instrument |
| Measuring range | 0.05 to 20M/30M/45M* |
| Measuring accuracy | Typica 1+ 2mm* |
| Display accuracy | 1mm |
| Laser classification | Class 2 |
| Pollution degree | 2 |
| Laser type | 620-690nm, < 1mW |
| 0.16x0.6 mrad, 0.25s | |
| Area,V olume measuring | ● |
| Continuous measurement | ● |
| Show beep | ● |
| Protection against splashes and dust | IP54 |
| Temperature range for operation | 0°C ~+40°C |
| Temperature range for storage | - 20°C +70°C |
| Battery life | 5000 measurements |
| Battery selection | LR03(AAA)2X 1.5v |
| Laser switch-off automatically | After 30 seconds |
| Instrument switch-off automatically | After 3 minutes |
| Dimensions | 118X 39X 20MM |
| weight(without battery) | 70g |
| max. Operating altitude: 2000m; max.relative humidity: 0-95% | |
Laser classification Integrated distance meter
That produces a visible laser beam which emerges from the front of theinstrument.
It is a Class 2 laser product in accordance with:
IEC608251: 2007 R adiation safety of laser products Laser Class 2 products:
Do not stare into the laser beam or direct it towards other people
unnecessarily. Eye protection is normally afforded by aversion responsesincluding the blink reflex.
Precautions:
Only use this product as a measuring sensor, not as a control device.Y our system must be configured and operated in such a way, thatin case of an erroneous measurement, malfunction of the device or powerfailure due to installed safety measures (e.g. safety limit switch), it isassured that no damage will occur.
WARNING:
Flat batteries must not be disposed of with householdwaste. Care for theenvironment. Always prevent access to the product by unauthorized personnel.
And take them to the collection points provided in accordance withnational or local regulations. The product must not be disposed of withhousehold waste. Dispose of the product appropriately in accordance with the national regulations in force in your country.