
Add to Cart
S20/S30 /S45 M Laser Based Distance Measurement Instrument High Display Accuracy
Limits of use
See section Technical Data
The product is designed for use in areas permanently habitable by humans,do not use the product in explosion hazardous areas or in aggressive environments.
Areas of responsibility
As the original producer responsiblity:
Responsible for providing security products include manual and origin ofthe parts.
Responsibilities of the manufacturer of non-original accessories:
The manufacturers of non original accessories for the products are
responsible for developing, implementing and communicating safety
concepts for their products. They are also responsible for the effectivenessof these safety concepts in combination with the products equipment.
Technical data
Model | S20/S30 /S45 m instrument |
Measuring range | 0.05 to 20M/30M/45M* |
Measuring accuracy | Typica 1+ 2mm* |
Display accuracy | 1mm |
Laser classification | Class 2 |
Pollution degree | 2 |
Laser type | 620-690nm, < 1mW |
0.16x0.6 mrad, 0.25s | |
Area,V olume measuring | ● |
Continuous measurement | ● |
Show beep | ● |
Protection against splashes and dust | IP54 |
Temperature range for operation | 0°C ~+40°C |
Temperature range for storage | - 20°C +70°C |
Battery life | 5000 measurements |
Battery selection | LR03(AAA)2X 1.5v |
Laser switch-off automatically | After 30 seconds |
Instrument switch-off automatically | After 3 minutes |
Dimensions | 118X 39X 20MM |
weight(without battery) | 70g |
max. Operating altitude: 2000m; max.relative humidity: 0-95% |
Use of the instrument
a). Press the button to switch on the device. The laser beam emits fromthe front.
b). Press again to measure the distance. The result will show on the screen.
Possible danger when use the device:
- The laser beam will harm eyes when aim to eyes directly
- The device may produces a spark and light dust or gas
- When clean battery electrolyte, human fingers may be affected
- The device may cause an hazardous radiation explosion
- Laser exposure radiation damage
Caution:
- Do not look straight at the laser beam
- Do not use the device in inflammable and explosive environment
- Remove the batteries to avoid the electrolyte leakage when not use thedevice.
- Do not try other functions that the device does not have itself
- Do not attempt to convert the performance of the device in any way