Shenzhen Jinside Technology Co., Ltd
Shenzhen Jinside Technology Co., Ltd
Add to Cart
0.05 To 20M / 30M / 45M Digital Distance Measuring Device Class 2 Laser Classification
WARNING:
Looking directly into the beam with optical aids ( e.g. binoculars,telescopes) can be hazardous. Precautions
Do not look directly into the beam with optical aids.
CAUTION:
Looking into the laser beam may be hazardous to the eyes.
Precautions:
Do not look into the laser beam. Make sure the laser is aimed above or
below eye level. (particularly with fixed installations, in machines, etc.)
Technical data
| Model | S20/S30 /S45 m instrument |
| Measuring range | 0.05 to 20M/30M/45M* |
| Measuring accuracy | Typica 1+ 2mm* |
| Display accuracy | 1mm |
| Laser classification | Class 2 |
| Pollution degree | 2 |
| Laser type | 620-690nm, < 1mW |
| 0.16x0.6 mrad, 0.25s | |
| Area,V olume measuring | ● |
| Continuous measurement | ● |
| Show beep | ● |
| Protection against splashes and dust | IP54 |
| Temperature range for operation | 0°C ~+40°C |
| Temperature range for storage | - 20°C +70°C |
| Battery life | 5000 measurements |
| Battery selection | LR03(AAA)2X 1.5v |
| Laser switch-off automatically | After 30 seconds |
| Instrument switch-off automatically | After 3 minutes |
| Dimensions | 118X 39X 20MM |
| weight(without battery) | 70g |
| max. Operating altitude: 2000m; max.relative humidity: 0-95% | |
Laser classification Integrated distance meter
That produces a visible laser beam which emerges from the front of theinstrument.
It is a Class 2 laser product in accordance with:
IEC608251: 2007 R adiation safety of laser products Laser Class 2 products:
Do not stare into the laser beam or direct it towards other people
unnecessarily. Eye protection is normally afforded by aversion responsesincluding the blink reflex.
Precautions:
Only use this product as a measuring sensor, not as a control device.Y our system must be configured and operated in such a way, thatin case of an erroneous measurement, malfunction of the device or powerfailure due to installed safety measures (e.g. safety limit switch), it isassured that no damage will occur.