
Add to Cart
Use of the instrument
a). Press the button G to switch onthe device. The laser beam emits fromthe front.
b). Press again 4 ) to measure thedistance. The result will show on thescreen.
Possible danger when use the device:-The laser beam will harm eyes whenaim to eyes directly.
-The device may produces a spark andlight dust or gas.
- When clean battery electrolyte, humanfingers may be affected.
- The device may cause an hazardousradiation explosion.
- Laser exposure radiation damage.Caution:
- Do not look straight at the laser beam-Do not use the device in inflammableand explosive environment.
- Remove the batteries to avoid the
electrolyte leakage when not use thedevice.
- Do not try other functions that thedevice does not have itself.-Do not attempt to convert the
performance of the device in any way.
Technical data
Model | LDM-MINl3O |
Measuring range | 0.05-30m |
Measuring accuracy | Typical±3mm |
Display accuracy | 1mm |
Laser assifiction | Class 2M II |
Lasertype | 620-690nm,<1mW |
Area,Volume measuring | ● |
Continuous measurement | ● |
pythagoras masurement | ● |
Plus-minus method | ● |
Hitorial storage | 10 |
Show beep | X |
Protection against splashes and dust | IP54 |
Temperature range for opration | OC ~+40C |
Temperature range for storage | 20C~ +70C |
Battery life | 20OO measurements |
Battery selecion | 300mA |
Laser sithofof atomaically | After 3O seconds |
Lnstrument swich-of auomaticly | After 3 minutes |
Dimensions | 75x34x16mm |
weight without(battery ) | 35g |
Charging volage | 5V |
Prohibited use
Symbols used
The following displays are used todistinguish precautions by the degreeof injury or damage
that may result in the precaution isignored.
WARNING:
A Indicate a potentially hazardoussituation or an unintended use which,if not avoided, will result in death or-serious injury.
CAUTlON:
A Indicate a potentially hazardoussituation or an unintended use which,if not avoided, will result in death orserious injury and/ or in appreciable
material .
P lmportant paragraphs which
must be adhered to in practice as theyenable the product to be used in a
technically correct and efficient manner.