Shenzhen Jinside Technology Co., Ltd
Shenzhen Jinside Technology Co., Ltd
Add to Cart
LCD Display Portable Emergency Car Jump Start Power Pack 12V 8000Mah
Warmth Tips:
A. In order to extend the cycling life of jump starter, we suggest that keeping above 75% power to start the vehicle;
B. Before starting the vehicle, please fully connect battery clamps with car battery;
C. Red clamp connect “+”; Black clamp connect “-”;
D. After starting the vehicle, please remove the battery clamps from car battery immediately;
E. If you can't start the vehicle, please check whether the battery clamps connect to car battery fully or not, please make sure the battery connector is clean before start-up. If the vehicle still cannot be started after 3 times, you should check other parts of the vehicle further, don't force to start, otherwise it will damage the jump starter.
| Car Jump Starter DF88 | |
| Item Name | Car Jump Starter |
| Item No | DF88-15 |
| Dimension | 135*77*16.5mm |
| Capacity | 8000MAH |
| Weight | 245g |
| Output | 12V Gasoline car; 5v/2.1A; Lightning(lightning,Strobe,SOS) |
| Input | 12v-1A |
| Starting Current | 200A |
| Peak Current | 300A |
| Charging time | 2hours |
| Operating temperature | -20 ºC ~60 ºC |
| Product Component | |
| 1. Body | |
| 2. High quality leather handbag | |
| 3. Battery clamp | |
| 4. Adaptor | |
| 5. Car charger | |
| 6. Mobile phone charger line | |
| 7. Product Instruction book | |
| 8. Certificate | |
| 9. Warranty card | |
Feature :
1. High capacity polymer battery support quick charge and low power consumption
2. Built-in protection features: over current protection; short circuit protection; overload protection; over-voltage protection; over-charge protection.
3. With 18600mAh.
4. With LCD display, work status indicates intuitive clear, start-up failure warning.
5. The built-in function of intelligent protection system.
6. The car start charging, without having to open the hood, save clip wire proccess.
